Materials Needed

• PVC Pipe (1/2” diameter) – 5-inch pieces x2
• Nails – 10 nails
• PVC T-Joint Connector (1/2” diameter) x1
• Bamboo Stick (Or PVC Pipe for handle)
• Drill and Drill Bits
• Glue (PVC adhesive)
• Screws (optional for added stability)

Step-By-Step Instructions

Step 1: Preparing the PVC Pieces

• Cut the PVC Pipe: Cut two pieces of PVC pipe, each measuring 5 inches long. These will be the sections that hold the nails for the rake’s tines.

• Drill Holes: Drill five evenly spaced holes along each PVC piece, keeping a 3 cm gap between each hole.

Step 2: Inserting Nails

• Add the Nails: Insert one nail into each hole you’ve drilled. Ensure the nails fit snugly and are evenly aligned to act as the rake’s “teeth.”
• Tip: Avoid drilling the holes too small, as this can cause the PVC to crack when adding the nails.

Step 3: Attach the PVC to the T-Joint Connector

• Glue the PVC Sections: Apply PVC glue around one end of each PVC section, then attach them to each side of the T-joint. The nails should be facing outward, forming the rake’s prongs. Allow the glue to set.

Step 4: Creating the Handle

• Insert Bamboo for Handle: Insert one end of the bamboo stick into the remaining opening of the T-joint connector to form the handle.
• Secure with Screws: For added stability, use screws to secure the bamboo to the PVC joint.

Final Touches and Testing

Your new DIY PVC garden rake is ready! This lightweight and eco-friendly rake is perfect for collecting leaves and grass without the bulkiness of a traditional rake.

Benefits of Using This DIY Garden Rake

• Lightweight Design: The PVC and bamboo structure make it easy to handle.
• Cost-Effective: A great way to reuse materials at home for a functional tool.
• Easy Storage: Compact design that’s easy to store when not in use.